Colt Plate 130 x 05, for H35-H43 (planetenwelle_201604041628430232: )Colt plates made of stainless steel, Ø 130mm with 5 pins Ø 6 x 24 mm in a distance of 22mm to the plate edge. This plate is suitable für sleeve up to the diamter of Ø 44 mm. You can choose the shape of the central intake. The pins are coated with MoS2 and they can be replaced. The direction of the rotation is counter clockwise CCW (viewed from above). |
54.00 €
*
Delivery weight: 311.284 g
available in smaller quantity |
Product no.: 415550034
Sleeve with gear end for substrates with shank Ø 30mm covering about 60 mm of the shank Sleeve will run on a pin of Ø 6mm with length 24mm |
75.00 €
*
Delivery weight: 251 g
available in smaller quantity |
|
Product no.: 395820823
Sleeve with gear end for substrates with shank Ø 32mm covering about 60 mm of the shank Sleeve will run on a pin of Ø 6mm with length 24mm |
61.00 €
*
Delivery weight: 204 g
available in smaller quantity |
|
Product no.: 408801256
Sleeve with gear end for substrates with shank Ø 32mm covering about 75 mm of the shank Sleeve will run on a pin of Ø 6mm with length 24mm |
85.00 €
*
Delivery weight: 230 g
On Stock: > |
|
Product no.: 415550377
Sleeve with gear end for substrates with shank Ø 32mm covering about 80 mm of the shank Sleeve will run on a pin of Ø 6mm with length 24mm |
71.00 €
*
Delivery weight: 212 g
Manufactured upon Order |
|
Product no.: 415552796
Sleeve with gear end for substrates with shank Ø34mm covering about 16 mm of the shank. Sleeve will run on a pin of Ø6mm with length 24mm. |
51.00 €
*
Delivery weight: 275 g
Manufactured upon Order |
|
Product no.: 397741848
Sleeve with gear end for substrates with shank Ø 34mm covering about 60 mm of the shank Sleeve will run on a pin of Ø 6mm with length 24mm |
72.00 €
*
Delivery weight: 343 g
available in smaller quantity |
|
Product no.: 415550049
Sleeve with gear end for substrates with shank Ø 40mm covering about 50 mm of the shank Sleeve will run on a pin of Ø 10mm with length 32mm |
74.00 €
*
Delivery weight: 296 g
Manufactured upon Order |
|
Product no.: 397490943
Sleeve with gear end for substrates with shank Ø 40mm covering about 70 mm of the shank Sleeve will run on a pin of Ø 10mm with length 32mm |
100.40 €
*
Delivery weight: 330 g
available in smaller quantity |
|