Sphere plates

Sphere plates

The Sphere holder forms a unit with the sleeves and the whirl spring. The usual setting of the springs is no longer necessary. The drivers for the third axis of rotation are inside the sphere plate. This protects from plasma and coating material. It achieves a high level of reliability and service life. Even in very high PVD systems, all drivers need to be always precisely positioned. 

Unlike Colt plates, the outer circumference of Sphere plates increases when longer tools are loaded.Therefore, the maximum tool length must be taken into account when making the selection. In this category you can choose Sphere plates that match your tools. The resulting planet diameters can be found in the gallery images. Then, in the next step, choose the right sphere tubes for your products.


Display per page
Sort by
Product no.: 390582233
192.00 *
Delivery weight: 377.134 g

Manufactured upon Order

Product no.: 391691840

Sphere Plate for 16 sleeves up to Ø08 shanks (sleeve OD = 10mm).For planets of diameter Ø125mm (for L1= 61mm) up to Ø150mm (for L1=098mm). Tilt angle 20°, stack height per level = 34mm (plus approx. 1 x L1 for the last level).

244.00 *
Delivery weight: 385 g

On Stock: > 5

Product no.: 391692144

Sphere Plate for 32 sleeves up to Ø06 shanks (sleeve OD = 08mm). For planets of diameter Ø125mm (for L1= 48mm) up to Ø180mm (for L1=130mm). Tilt angle 20°, stack height per level = 33mm (plus approx. 1 x L1 for the last level).

320.00 *
Delivery weight: 705.727 g

Manufactured upon Order

Product no.: 391701147

Sphere Plate for 24 sleeves up to Ø08 shanks (sleeve OD = 10mm). For planets of diameter Ø135mm (for L1= 63mm) up to Ø170mm (for L1=115mm). Tilt angle 20°, stack height per level = 39mm (plus approx. 1 x L1 for the last level).

227.00 *
Delivery weight: 743.24 g

Manufactured upon Order

Product no.: 391701549
380.00 *
Delivery weight: 825.516 g

Manufactured upon Order

Product no.: 394361925

Sphere Plate for 36 sleeves up to Ø03 shanks (sleeve OD = 08mm). For planets of diameter Ø135mm (for L1= 50mm). Tilt angle 20°, stack height per level = 40mm (plus approx. 1 x L1 for the last level).

279.00 *
Delivery weight: 946.482 g

available in smaller quantity

Product no.: 398181745

Sphere Plate for 12 sleeves up to Ø08 shanks (sleeve OD = 10mm). For planets of diameter Ø135mm (for L1= 122mm) up to Ø150mm (for L1=144mm). Tilt angle 20°, stack height per level = 39mm (plus approx. 1 x L1 for the last level).

157.00 *
Delivery weight: 384.649 g

On Stock: > 5

Product no.: 402801057
209.00 *
Delivery weight: 412 g

On Stock: > 5

*
Prices plus VAT, plus delivery